企业QQ:800050789
TAG标签 | 网站地图 | 企业资质 | 留言板 | 联系我们
首页 | 公司简介 | SWP香港昌晖 | WP香港上润 | HR香港虹润仪表 | 西安仪表 | 百特工控 | 北京布莱迪 | 安徽天康仪表 | 德国威卡WIKA | 厦门宇电 | 日本横河EJA
公告:主营产品 SWP香港昌晖,WP香港上润,西安仪表,百特工控,北京布莱迪
站内搜索:
产品名称: 德国威卡wika代理 带电子信号输出的压力表,德国威卡wika代理 带
产品型号: 德国威卡wika代理 带电子信号输出的压力表,德国威卡wika代理 带电子信号输出的压力表,
产品类别: 电子压力测量仪表
::企业资质::
::产品简介::

德国威卡wika代理 带电子信号输出的压力表,德国威卡wika代理 带电子信号输出的压力表,德国威卡wika代理 带电子信号输出的压力表,德国威卡wika代理 带电子信号输出的压力表,德国威卡wika代理 带电子信号输出的压力表,德国威卡wika代理 带电子信号输出的压力表,

德国威卡wika代理 带电子信号输出的压力表

香河华拓电机制造有限公司
产品型号:
所 在 地:北京
产品描述:
智能型波登管压力表带电信号输出,不锈钢系列,安全型,表圆直径 100,160
型号:PGT23.100/PGT23.160
 
  

华拓电机有限公司
 
电话: 010-58461273 
手机: 15330223273
传真:01064160267
 
地址: 北京市朝阳区东直门外大街18楼223室 
邮编: 100027

应 用
Acquisition and display of process values
Transmission of process value to the control room, 4 ... 20 mA; 0 ... 20 mA; 0 ... 10 V
Easy-to-read, local analogue display needs no power supply
Safety-related applications
 
特别功能
„Plug and play“ means no configuration necessary
Signal transmission in accordance with Namur
Measuring ranges from 0.6 bar to 1000 bar
Easy-to-read, Ø 100 mm analogue display
S3 Safety pressure gauge per EN 837-1
 
intelliGAUGE Model PGT23.100
 
详 细

Nominal size
100 mm

Accuracy class
Class 1.0

Display range
0 … 0.6 up to 0 … 1000 bar
including all corresponding ranges for negative and/or negative and positive/compound pressure

Wherever the process pressure has to be indicated locally,and, at the same time, signal transmission to a central controller or remote control room is wanted, the PGT23.100 intelliGAUGE
can be used.
Through the combination of a mechanical measuring system and electronic signal processing, the process pressure can be read securely, even if the power supply is lost. The PGT23.100 intelliGAUGE fulfils all safety-related requirements of the relevant standards and regulations for the on-site display of the operating pressure of pressure vessels. An additional measuring point for the mechanical
pressure indication can thus be saved.

The PGT23.100 is built upon a high-quality, stainless steel pressure gauge with a 100 mm nominal size. The pressure gauge is manufactured in accordance with EN 837-1.

 The durable, fully-welded Bourdon tube measuring system produces a pointer rotation proportional to the pressure. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. From this, the pressure-proportional, 4 ... 20 mA electrical output signal is produced.
The electronic WIKA transmitter, integrated into the highquality Model 23x.30 mechanical pressure gauge, combines the advantages of electrical signal transmission with the
advantages of a local mechanical display.

The measuring span (electrical output signal) is set automatically along with the mechanical display, i.e. the scale over the full display range corresponds to 4 ... 20 mA. The electrical zero point can also be set manually.

________________________________________________________

Accessory: Power supply for top hat rail

input

output max. current description 230Vac 24Vdc 70mA A-VA-1 90…
   253Vac
24Vdc 500mA KFA6-STR-1.24.500 12…
30Vdc
  4.. 20mA Ex  signal isolator
Typ SI 815
20…
35Vdc
max. 25,4Vdc 0/4.. 20mA Ex- transmitter power supply
KFD2-STC4-Ex1
栏目导航
热点内容
相关产品
付款方式